Ami 25Fw is a love V-neck pullover sweater originally purchased and developed. It is made with custom blended yarn consisting of 50% cashmere, 40% cotton, and 10% nylon. The addition of nylon enhances the texture smoothness and makes the garment look more tailored and stylish. The knitting process of this sweater is extremely complex. After the yarn is in place, the first step is to card the wool on a carding machine. The second step involves adding special medicine water for washing the yarn to remove surface impurities. The third step is to make small pieces, and then workers need to match and sew each thread one by one on a binding machine. The fourth step is to complete the finished garment and need to wash it to fix the shape and enhance the texture. Finally, the temperature of the ironing needs to be controlled for shaping and then packaged for shipment. This style is different from the common sweater's binding method. It adopts the reverse binding process, which requires extremely skilled workers. The time for this garment to be processed on the machine is very slow. It uses an imported STOLL machine with 5 needles. One garment takes up to 110 minutes, and it can only produce 10 finished products in a day. The weight of a single large-sized finished product is as high as 1000g. Slow work yields fine results. The love part is made with embroidery technology. After multiple pattern adjustments and debugging, it reaches the original version effect. This requires extremely high skills from the master and the craftsmanship of the weaving machine. To ensure that the size of the buttons is consistent with the original version, the original version was disassembled and analyzed. Independent molds were customized, horn buttons were made, logos were engraved, and the original version was highly restored. Customized the same version of washing labels, special material washing tags, front and back size labels, all details were achieved. This style is for both men and women. Washing suggestions: hand wash or gentle machine wash. For machine washing, please use a single garment laundry bag and wash gently. Do not dry or wash with hot water. Do not soak or expose to direct sunlight for a long time. Lay flat to dry. Do not hang to dry. The correct washing method can extend the lifespan of the garment.

Ami 25Fw is a love V-neck pullover sweater originally purchased and developed. It is made with custom blended yarn consisting of 50% cashmere, 40% cotton, and 10% nylon. The addition of nylon enhances the texture smoothness and makes the garment look more tailored and stylish. The knitting process of this sweater is extremely complex. After the yarn is in place, the first step is to card the wool on a carding machine. The second step involves adding special medicine water for washing the yarn to remove surface impurities. The third step is to make small pieces, and then workers need to match and sew each thread one by one on a binding machine. The fourth step is to complete the finished garment and need to wash it to fix the shape and enhance the texture. Finally, the temperature of the ironing needs to be controlled for shaping and then packaged for shipment. This style is different from the common sweater's binding method. It adopts the reverse binding process, which requires extremely skilled workers. The time for this garment to be processed on the machine is very slow. It uses an imported STOLL machine with 5 needles. One garment takes up to 110 minutes, and it can only produce 10 finished products in a day. The weight of a single large-sized finished product is as high as 1000g. Slow work yields fine results. The love part is made with embroidery technology. After multiple pattern adjustments and debugging, it reaches the original version effect. This requires extremely high skills from the master and the craftsmanship of the weaving machine. To ensure that the size of the buttons is consistent with the original version, the original version was disassembled and analyzed. Independent molds were customized, horn buttons were made, logos were engraved, and the original version was highly restored. Customized the same version of washing labels, special material washing tags, front and back size labels, all details were achieved. This style is for both men and women. Washing suggestions: hand wash or gentle machine wash. For machine washing, please use a single garment laundry bag and wash gently. Do not dry or wash with hot water. Do not soak or expose to direct sunlight for a long time. Lay flat to dry. Do not hang to dry. The correct washing method can extend the lifespan of the garment.
Ami 25Fw is a love V-neck pullover sweater originally purchased and developed. It is made with custom blended yarn consisting of 50% cashmere, 40% cotton, and 10% nylon. The addition of nylon enhances the texture smoothness and makes the garment look more tailored and stylish. The knitting process of this sweater is extremely complex. After the yarn is in place, the first step is to card the wool on a carding machine. The second step involves adding special medicine water for washing the yarn to remove surface impurities. The third step is to make small pieces, and then workers need to match and sew each thread one by one on a binding machine. The fourth step is to complete the finished garment and need to wash it to fix the shape and enhance the texture. Finally, the temperature of the ironing needs to be controlled for shaping and then packaged for shipment. This style is different from the common sweater's binding method. It adopts the reverse binding process, which requires extremely skilled workers. The time for this garment to be processed on the machine is very slow. It uses an imported STOLL machine with 5 needles. One garment takes up to 110 minutes, and it can only produce 10 finished products in a day. The weight of a single large-sized finished product is as high as 1000g. Slow work yields fine results. The love part is made with embroidery technology. After multiple pattern adjustments and debugging, it reaches the original version effect. This requires extremely high skills from the master and the craftsmanship of the weaving machine. To ensure that the size of the buttons is consistent with the original version, the original version was disassembled and analyzed. Independent molds were customized, horn buttons were made, logos were engraved, and the original version was highly restored. Customized the same version of washing labels, special material washing tags, front and back size labels, all details were achieved. This style is for both men and women. Washing suggestions: hand wash or gentle machine wash. For machine washing, please use a single garment laundry bag and wash gently. Do not dry or wash with hot water. Do not soak or expose to direct sunlight for a long time. Lay flat to dry. Do not hang to dry. The correct washing method can extend the lifespan of the garment.
Ami 25Fw is a love V-neck pullover sweater originally purchased and developed. It is made with custom blended yarn consisting of 50% cashmere, 40% cotton, and 10% nylon. The addition of nylon enhances the texture smoothness and makes the garment look more tailored and stylish. The knitting process of this sweater is extremely complex. After the yarn is in place, the first step is to card the wool on a carding machine. The second step involves adding special medicine water for washing the yarn to remove surface impurities. The third step is to make small pieces, and then workers need to match and sew each thread one by one on a binding machine. The fourth step is to complete the finished garment and need to wash it to fix the shape and enhance the texture. Finally, the temperature of the ironing needs to be controlled for shaping and then packaged for shipment. This style is different from the common sweater's binding method. It adopts the reverse binding process, which requires extremely skilled workers. The time for this garment to be processed on the machine is very slow. It uses an imported STOLL machine with 5 needles. One garment takes up to 110 minutes, and it can only produce 10 finished products in a day. The weight of a single large-sized finished product is as high as 1000g. Slow work yields fine results. The love part is made with embroidery technology. After multiple pattern adjustments and debugging, it reaches the original version effect. This requires extremely high skills from the master and the craftsmanship of the weaving machine. To ensure that the size of the buttons is consistent with the original version, the original version was disassembled and analyzed. Independent molds were customized, horn buttons were made, logos were engraved, and the original version was highly restored. Customized the same version of washing labels, special material washing tags, front and back size labels, all details were achieved. This style is for both men and women. Washing suggestions: hand wash or gentle machine wash. For machine washing, please use a single garment laundry bag and wash gently. Do not dry or wash with hot water. Do not soak or expose to direct sunlight for a long time. Lay flat to dry. Do not hang to dry. The correct washing method can extend the lifespan of the garment.
Ami 25Fw is a love V-neck pullover sweater originally purchased and developed. It is made with custom blended yarn consisting of 50% cashmere, 40% cotton, and 10% nylon. The addition of nylon enhances the texture smoothness and makes the garment look more tailored and stylish. The knitting process of this sweater is extremely complex. After the yarn is in place, the first step is to card the wool on a carding machine. The second step involves adding special medicine water for washing the yarn to remove surface impurities. The third step is to make small pieces, and then workers need to match and sew each thread one by one on a binding machine. The fourth step is to complete the finished garment and need to wash it to fix the shape and enhance the texture. Finally, the temperature of the ironing needs to be controlled for shaping and then packaged for shipment. This style is different from the common sweater's binding method. It adopts the reverse binding process, which requires extremely skilled workers. The time for this garment to be processed on the machine is very slow. It uses an imported STOLL machine with 5 needles. One garment takes up to 110 minutes, and it can only produce 10 finished products in a day. The weight of a single large-sized finished product is as high as 1000g. Slow work yields fine results. The love part is made with embroidery technology. After multiple pattern adjustments and debugging, it reaches the original version effect. This requires extremely high skills from the master and the craftsmanship of the weaving machine. To ensure that the size of the buttons is consistent with the original version, the original version was disassembled and analyzed. Independent molds were customized, horn buttons were made, logos were engraved, and the original version was highly restored. Customized the same version of washing labels, special material washing tags, front and back size labels, all details were achieved. This style is for both men and women. Washing suggestions: hand wash or gentle machine wash. For machine washing, please use a single garment laundry bag and wash gently. Do not dry or wash with hot water. Do not soak or expose to direct sunlight for a long time. Lay flat to dry. Do not hang to dry. The correct washing method can extend the lifespan of the garment.
Ami 25Fw is a love V-neck pullover sweater originally purchased and developed. It is made with custom blended yarn consisting of 50% cashmere, 40% cotton, and 10% nylon. The addition of nylon enhances the texture smoothness and makes the garment look more tailored and stylish. The knitting process of this sweater is extremely complex. After the yarn is in place, the first step is to card the wool on a carding machine. The second step involves adding special medicine water for washing the yarn to remove surface impurities. The third step is to make small pieces, and then workers need to match and sew each thread one by one on a binding machine. The fourth step is to complete the finished garment and need to wash it to fix the shape and enhance the texture. Finally, the temperature of the ironing needs to be controlled for shaping and then packaged for shipment. This style is different from the common sweater's binding method. It adopts the reverse binding process, which requires extremely skilled workers. The time for this garment to be processed on the machine is very slow. It uses an imported STOLL machine with 5 needles. One garment takes up to 110 minutes, and it can only produce 10 finished products in a day. The weight of a single large-sized finished product is as high as 1000g. Slow work yields fine results. The love part is made with embroidery technology. After multiple pattern adjustments and debugging, it reaches the original version effect. This requires extremely high skills from the master and the craftsmanship of the weaving machine. To ensure that the size of the buttons is consistent with the original version, the original version was disassembled and analyzed. Independent molds were customized, horn buttons were made, logos were engraved, and the original version was highly restored. Customized the same version of washing labels, special material washing tags, front and back size labels, all details were achieved. This style is for both men and women. Washing suggestions: hand wash or gentle machine wash. For machine washing, please use a single garment laundry bag and wash gently. Do not dry or wash with hot water. Do not soak or expose to direct sunlight for a long time. Lay flat to dry. Do not hang to dry. The correct washing method can extend the lifespan of the garment.
Ami 25Fw is a love V-neck pullover sweater originally purchased and developed. It is made with custom blended yarn consisting of 50% cashmere, 40% cotton, and 10% nylon. The addition of nylon enhances the texture smoothness and makes the garment look more tailored and stylish. The knitting process of this sweater is extremely complex. After the yarn is in place, the first step is to card the wool on a carding machine. The second step involves adding special medicine water for washing the yarn to remove surface impurities. The third step is to make small pieces, and then workers need to match and sew each thread one by one on a binding machine. The fourth step is to complete the finished garment and need to wash it to fix the shape and enhance the texture. Finally, the temperature of the ironing needs to be controlled for shaping and then packaged for shipment. This style is different from the common sweater's binding method. It adopts the reverse binding process, which requires extremely skilled workers. The time for this garment to be processed on the machine is very slow. It uses an imported STOLL machine with 5 needles. One garment takes up to 110 minutes, and it can only produce 10 finished products in a day. The weight of a single large-sized finished product is as high as 1000g. Slow work yields fine results. The love part is made with embroidery technology. After multiple pattern adjustments and debugging, it reaches the original version effect. This requires extremely high skills from the master and the craftsmanship of the weaving machine. To ensure that the size of the buttons is consistent with the original version, the original version was disassembled and analyzed. Independent molds were customized, horn buttons were made, logos were engraved, and the original version was highly restored. Customized the same version of washing labels, special material washing tags, front and back size labels, all details were achieved. This style is for both men and women. Washing suggestions: hand wash or gentle machine wash. For machine washing, please use a single garment laundry bag and wash gently. Do not dry or wash with hot water. Do not soak or expose to direct sunlight for a long time. Lay flat to dry. Do not hang to dry. The correct washing method can extend the lifespan of the garment.

Latest Article