Balenciaga BLCG Black and White Checkered Frayed Long-Sleeved ShirtThe fabric is produced through a dyeing process followed by weaving. The finished garment adheres to the standard of aligning the patterns. The front and back of the body, the left and right sleeves, and the front pocket patches need to be precisely aligned with the patterns. The cutting bed uses infrared positioning for precise material arrangement. Due to the requirements for pattern alignment, a significant amount of fabric waste is inevitable. Any deviation in the pattern alignment of the cutting pieces will result in their being deemed as scrap. The pattern lines on the collar face and collar base are kept consistent. The arc of the collar seat has been adjusted multiple times to avoid the wrinkling and deformation of the lapel when worn. The front pocket with the same material as the lining is a key part of the craftsmanship. The pattern lines of the pocket pieces must be aligned with those of the front section. During the sewing process, the seamstress continuously controls the alignment reference point to prevent the bag from tilting, warping, or having a broken pattern line. The seam closure is assembled with matte metal four-in-one fasteners. The spacing of the closure is standardized. The hemming process with frayed edges is carried out by hand, with meticulous handling to precisely control the length, density, and tightness of the raw edges. The craftsmanship requires the prevention of excessive tearing that could cause large areas of yarn loss or uneven local holes. It tests the practical experience of the workers.