Balenciaga Double Glue Label Printed Short SleeveThe entire pattern replicates the disorderly overlapping of multiple tapes in a retro style. The entire printing process is based on a professional high-temperature ironing machine to form the pieces and press them in multiple stages. The entire production process is complex and has strict technical requirements. The fabric used is heavyweight ring-spun all-cotton knitted fabric. The garment undergoes double pre-treatment of enzymatic stone washing and shrinkage setting before being subjected to the pre-pressing process. The shrinkage machine is used to calibrate the fabric's warp and weft density to counteract the thermal shrinkage deformation caused by the subsequent high-temperature ironing. The pre-treatment process of the fabric far exceeds the standard of basic T-shirts. The multiple groups of irregularly arranged tape labels on the chest are independently colored and designed. Each piece of the pattern is separated into the heat-melt adhesive layer, color paste layer, and surface matte film layer. Each piece of tape label requires a separate delivery to the constant-temperature ironing machine for precise pressing. The equipment pressure, temperature, and ironing duration are adjusted by zones. During the layer-by-layer overlapping and ironing process, the upper label body needs to precisely avoid the already formed printed pattern on the lower layer. The alignment tolerance of 0.15mm is strictly controlled to avoid the overflow of hot glue paste and smudging. The vertical long strip labels on the side are limited by the curvature of the garment body and require a dedicated positioning jig for fixing the garment piece. Segmental side pressing for shaping is carried out to prevent fabric stretching and warping. After the layer-by-layer heat pressing, it enters the segmented gradient drying process. The stepped temperature control strengthens the adhesion of the ink. Finally, the garment is re-washed and aged to simulate the natural wear texture of the tape, and the defective products with warping, delamination, or misalignment after heat pressing are filtered out. Compared to one-time screen printing, this production method of multiple modules and multiple-stage heat pressing has doubled the plate loss and fabric scrap rate. It goes through more than twenty detailed processes from plate adjustment to post-processing of the finished product. It is implemented by the collaboration of high-precision ironing equipment and experienced workers. Through complex processes, it restores the core design of the American bumper sticker's casual overlapping.