Mimi MM Small Embroidery Patch Double-Sided Wearable Hooded Jacket CoatThe fabric used is the functional Ponge fabric, with a high warp density and low weft density. The number of warp threads per inch is much greater than that of weft threads. The surface has a fine and uniform diamond-shaped texture, with a smooth touch and a slight sheen. The fiber characteristics give it natural moisture absorption and breathability, and it is not prone to overheating. The high-density structure enhances its wear resistance while also having good anti-wrinkle properties. The single-sided fish-scale fabric is woven with cotton as the base, with the front side being a smooth knitted surface. The skin-contact side is formed by the floating thread weaving technology of the knitting machine into a three-dimensional loop, increasing the fluffy feeling, and the touch is delicate. The loop structure has a large water absorption capacity and quick evaporation, and it does not loosen or deform after multiple washes. By actively intervening in the shrinkage potential of the cotton knitted surface, the fabric achieves a transition from being prone to change to stability, improving the dimensional stability, and being less prone to deformation and wrinkles. Wrapped with bias-cut strips, the width is controlled at around 0.4CM. Align the edges of the two layers of fabric, fold and sew them together, with the stitching hidden in the interlayer. Then, fix it with "anchor points". This forms both the inner and outer surfaces without loose edges, with all the seams completely wrapped, and prevents the uncomfortable experience of slipping during wearing. Customized accessories